Industry Day

For Norwegian participants: read about the program (in Norwegian only)

Interoperability of Industrial Data

Objectives:

  • Facilitate and understand purpose, status and use of SC4 standards
  • Show uses of SC4 standards to Norwegian stakeholders and to SC4
  • Review issues and requirements of standard product data representation in Norwegian industry

The Industry Day is hosted at the Thon Hotel Oslofjord on Wednesday 10 May from 0800 to 1700.

Read about the program in Norwegian.

Agenda

Time  Title and presenter Relevant standard
0800 Coffee and registration  
0830 Welcome and Opening
Jacob Mehus (CEO, Standards Norway)
 
0840 Introduction to the SC4 Industry Day
Howard Mason (SC 4 chair)
 
0900 PLM data exchange in large industrial programs using STEP
Jochen Haenisch (Jotne)
ISO 10303-214, ISO 10303-239 Design and operational data
Global cooperation to produce complex systems, such, as, aircraft, require data exchange solutions. Especially the defence aeronautics sector applies increasingly STEP standards to ensure long-term and trustworthy solutions for design, manufacturing and logistics data. With reference to on-going programs, the presentation will give an overview of the information scope, standards and processes that are required to develop and validate such data exchange solutions.
0915 Capture and Reuse of Engineering Knowledge in Digital Twins
Remi Lanza (NTNU/Jotne)
ISO 10303-209 Link design, analysis and testing data
Related to AP 209: Engineering data that are available throughout the lifecycle of a complex product would be a useful knowledge base. This requires a homogeneous data representation and a central integration of a.o. design, analysis and testing of the product. The talk presents how to use AP209 to capture and reuse such knowledge. A use case will be presented, and archiving and retrieval of data, as well as limitations of AP209 will be discussed. 
0930 Additive Manufacturing in Military Operations
Ole Fretheim (Norwegian Defence Research Establishment, FFI)
ISO 10303-242 Additive manufacturing requirements
Additive manufacturing can change the supply chain for spare parts in military operations. Spare parts supply in military operations is complex and costly. Using AM in operations represents opportunity for big savings but is also challenging due to verification of production quality. FFI deployed a container equipped for part design and additive manufacturing during the military operation “Cold Response” this winter. Experience from the operation will be covered in the presentation.
0950

The Impact of Isogeometric Analysis on Engineering Processes for Additive Manufacturing
Tor Dokken, Dr. Heidi Dahl (SINTEF)

ISO 10303-242 Engineering process using isogeometric analysis for additive manufacturing

The talk will address volumetric LR B-spline approximation and visualization and their use in isogeometric design and analysis. It will focus on interoperability issues for analysis based design in additive manufacturing (AM), AM process planning, thermal and residual stress simulation of the AM process plan, quality control of the shape produced by AM, as well as final finishing by subtractive/abrasive process.

1010 Discussion  
1030 Coffee Break  
1100 Interoperability Solution for the New Oslo Airport Terminal (BIM)
Mats Mareng Weum (OSL/T2, Aas-Jakobsen)
ISO 16739, IFC, Engineering and construction
Open BIM (Building Information Model) is being applied during the construction of the terminal 2 at the Oslo airport, OSL. Discipline models are received from various subcontractors in ISO 16739 format. They are merged into a central repository before the resulting comprehensive construction is sliced again for distribution and further detailing. The talk will highlight the benefits of standards-based BIM not only for collaboration, but also for data archival.
1120

Facility Management at the Trondheim Hospital using IFC (BIM)
Piotr Dabrowski, St. Olav Hospital

ISO 16739, IFC, Lifecycle management

The presentation will address workflow and tools for the digitalization of facility management. This includes hand-over of building information models for operational use during the lifetime of a hospital using ISO 16739 and subsequent active hosting of the merged open-standards repository of an entire building or a compound of buildings.
1140 Discussion  
1200 Lunch  
1300

Owner/Operators priorities for Standards Development
Vic G. Samuel, IOGP- ISSC (Chevron)

 
Recently the Information Standards Sub Committee (ISSC) has been created under IOGP as owner operator forum to formulate demands and wishes for international standards for the oil, gas, process and power industry. The committee works standards consortia to meet those demands. The presenter will address the business case for the committee, current work and plans for the coming years. 
1315 Capital Facilities Information Handover Specification (CFIHOS)
Anders Thostrup, USPI (Shell)
ISO 15926
The CFIHOS standard that has been developed by USPI-ENAA over the past 4 years is now being adopted in the oil, gas, process and power industry by owner operators, EPC's, software suppliers. The standard currently is maintained by industry with the intent to finally bring it under ISO 15926. The presenter will address the business case, the technical content and options to join the project.
1330 Industry Standard Datasheet Definition (ISDD)
Alan Johnston (MIMOSA)
 
1345 Solving common challenges across domains – planning and scheduling
Robert Skaar (Statoil)
ISO 15926

To plan and schedule programs, projects, task forces and other activities is a generic function across many industries. Most of the times scheduling is done by several responsible entities, which use their internal scheduling software. Today it’s not possible to exchange schedule between software, due to lack of a standard to do so.

The Integrated Lifecycle Asset Planning (ILAP) project have developed a standard, making it possible to exchange schedules between software. We invite other domains to join the project and participate.

1400 Requirements management supported by semantic reasoning
Anders Gjerver (Aibel)
ISO 15926 Requirement management, semantic reasoning
Aibel is using an industrial ontology to support requirement management in our EPC projects. This ISO 15926 and W3C compliant ontology is utilized to establish and manage requirement within multiple EPC projects, and globally across the plants and EPC project. We will demonstrate how semantic reasoning supports selection of relevant requirements. 
1415 ISO 15926 ontology as basis for smart and expedite search and reuse of engineering information
Johan Wilhelm Klüwer (DNV GL) and Jann Kåre Slettebakk (Aker Solutions)
 ISO 15926
1430 Discussion and conclusions – Oil and Gas  
1500 Coffee Break  
1530

The Network Rail Asset Data Governance Framework
Dr. Timothy M. King, Babcock International

ISO 8000

Following repeated under performance, Network Rail was under severe pressure from the Office of Rail and Road regulator to address issues with asset data.

Network Rail recognised that improvement would only follow on from treating data as a valuable corporate asset. 

After identifying ISO 8000 as providing best guidance for establishing systematic and systemic data quality, Network Rail has created the Asset Data Governance Framework based on this standard. This framework addresses five key topics: policy; people; process; safety; and assurance. The framework was runner-up in the Institute for Asset Management annual awards for project achievement in 2016. 

By implementing ISO 8000, Network Rail has been able to achieve various benefits, including the following:
- quantify the enterprise-wide impacts of issues with data quality;
- establish clear accountabilities and responsibilities for data management across the organization;
- ensure that asset data is now the most mature area of asset management within Network Rail.

1550

Requirements and functionality of toolsets to ensure Governance and Data Quality
including Transnet Master Data Vendor Programme using ISO 8000 part 100 series

Dr Salomon de Jager, Pilog
ISO 8000
 

Transnet is the South African parastatal company owning all of the national railways, stations, facilities, national ports authority and terminals, national pipelines and associated engineering, manufacturing and maintenance facilities. In 2006 Transnet embarked on a procurement Master Data program consolidating data for 6 separate SAP systems into a single ISO 8000 Master Data instance with governance control of master data for vendors, materials and services.Specific problems encountered in each of the Master Data domains are discussed as well as the solutions implemented with reference to the business benefits.

The role of a corporate dictionary, specified data requirements according to ISO 8000 templates as well as the various associated data quality and rendering rules are demonstrated. This include client specific client requirements such as political targets of black economic empowerment that need to be met, monitored and reported against specific vendor criteria including other management KPI’s.

 

1625

Current status and prospect of the public data opening program in Korea
Dr Boomann Choung, Vice President Department of Government 3.0, National Information Agency

 ISO 8000
 

Korea ranked first in the UN E-Government Survey for three consecutive 2 year-terms. This presentation provide insight in:

  • achievements of the public data opening program driven by the Korean government,
  • the model used to assess the organizational
  • maturity of public data quality management,
  • standards required to open the data to the public,
  • plans to expand the public data opening program.

Government 3.0 is a new paradigm for government operation to deliver customized public services and generate new jobs in a creative manner by opening and sharing government-owned data to the public and encouraging communication and collaboration between government departments.

1645 Discussion and conclusions  
1700 End  
Host:
Co-organizer: