ISO 13784-1:2014

NOK 2 238,00 (eks. mva) InformationOvervåk standarden
basket Skriv ut på papir basket Trykket og innbundet
Få nettbasert tilgang
Status: Check Gyldig
Norsk tittel: Reaction to fire test for sandwich panel building systems — Part 1: Small room test
Engelsk tittel: Reaction to fire test for sandwich panel building systems — Part 1: Small room test
Varetype: Standard
Språk: Engelsk
Utgave: 2 (2014-02-03)
Erstatter: ISO 13784-1:2002 Alert Tilbaketrukket
Antall sider: 32

NOK 2 238,00 (eks. mva)
NOK 2 797,50 (ink. mva)

Omfang: <p>This part of <std std-id="iso:std:iso:13784:en" type="undated"><std-ref>ISO 13784</std-ref></std> specifies a method of test for determining the reaction to fire behaviour of sandwich panel building systems, and the resulting flame spread on or within the sandwich panel building construction, when exposed to heat from a simulated internal fire with flames impinging directly on the internal corner of the sandwich panel building construction.</p><p>The test method described is applicable to free-standing, self-supporting, and frame-supported sandwich panel systems. This part of <std std-id="iso:std:iso:13784:en" type="undated"><std-ref>ISO 13784</std-ref></std> is not intended to apply to sandwich panel products which are glued, nailed, bonded, or similarly supported by an underlying wall or ceiling construction. For products used as internal linings, the <std std-id="iso:std:iso:9705:en" type="undated"><std-ref>ISO 9705</std-ref></std> test method should be used.</p><p>This part of <std std-id="iso:std:iso:13784:en" type="undated"><std-ref>ISO 13784</std-ref></std> provides for small room testing of sandwich panel building systems. For large-room testing of sandwich panel building systems, <std std-id="iso:std:iso:13784:-2:en" type="undated"><std-ref>ISO 13784-2</std-ref></std> should be used.</p><p>This method is not intended to evaluate the fire resistance of a product, which should be tested by other means.</p><non-normative-note><label>NOTE</label><p>Because of their design, some systems may be unsuitable for testing with this part of <std std-id="iso:std:iso:13784:en" type="undated"><std-ref>ISO 13784</std-ref></std>. These systems may be suitable for testing with <std std-id="iso:std:iso:13784:-2:en" type="undated"><std-ref>ISO 13784-2</std-ref></std> and the latter test method should be considered. In this case application area of the test report is restricted.</p></non-normative-note>
Fastsatt: 2014-02-03
ICS: 13.220.50 - Brannmotstand hos bygningsmaterialer og bygningsdeler