NS-EN ISO 52016-1:2017

NOK 1 567,00 (eks. mva) InformationOvervåk standarden
basket Skriv ut på papir basket Trykket og innbundet
Vis abonnementsmuligheter
Status: Check Gyldig
Norsk tittel: Bygningers energiytelse - Energibehov for varme og kjøling, innetemperatur og følbare og latente varmelaster - Del 1: Beregningsprosedyrer (ISO 52016-1:2017)
Engelsk tittel: Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 1: Calculation procedures (ISO 52016-1:2017)
Varetype: Standard
Språk: Engelsk
Utgave: 1 (2017-10-01)
Erstatter: NS-EN 15255:2007 Alert Tilbaketrukket
NS-EN 15265:2007 Alert Tilbaketrukket
NS-EN ISO 13790:2008 Alert Tilbaketrukket
NS-EN ISO 13791:2012 Alert Tilbaketrukket
NS-EN ISO 13792:2012 Alert Tilbaketrukket
Antall sider: 220
Pris:

NOK 1 567,00 (eks. mva)
NOK 1 958,75 (ink. mva)

Inkludert i: NS ICS 91 - Bygningsmaterialer og bygging
NS ICS 91.120
NS ICS 91.120.10
Omfang: The work concerns revision of existing standard EN ISO 13790. The scope will change. This revised international standard will provide calculation methods for assessment of the sensible and latent energy needs for space heating and cooling of a residential or a non-residential building, or a part of it, referred to as "the building". This method calculates, for a thermal zone in a building, the sensible and latent thermal energy needs based on the balance between the heat and moisture transfer by transmission and ventilation and the internal and solar heat gains. The energy needs are calculated by an hourly or monthly method. The hourly calculation method will be described in EN ISO 52017-1 (upgraded version of simple hourly method). The monthly method will be given in this standard including procedures how to derive monthly correlation coefficients from hourly calculations. The following input values and boundary conditions are obtained from other standards in the EPB series: overall routing of the energy performance calculation; occupancy patterns and conditions of use; thermal zoning of the building; environment conditions, thermal, dynamic (mass) and solar characteristics of building elements and their junctions; air infiltration and ventilation and ventilation system characteristics. Moisture absorption and desorption in building elements will not be considered. Because some of the characteristics that are input for the calculation are also dependent on the thermal balance calculation, many interactions will have to be accounted for at the level of each time step. The standard will contain simplified approaches for the energy balance in adjacent spaces that are not heated or cooled, including sunspaces
Komité: SN/K 034
Fastsatt: 2017-10-01
ICS: 91.120.10 - Varmeisolering